Replacement Teac X-1000 X1000 parts. These are salvage and functioning parts from a Teac X-1000 X1000 and some may fit the Teac X-1000R X1000R X-2000 X-2000R X2000 X2000R X-7R X7R X-300 X300 X-700 X700 Open Reel to Reel Tape decks / recorders. Teac X-1000 Motor, heads, brakes, circuit boards, Solenoid, rollers, idler, tension arms etc.

20% off sale
on salvage audio & keyboard parts.
See sales banners on parts pages for details

(Click on above thumbnails to enlarge photos)
TEAC
X-1000 X1000 X1000R
Reel-Reel Deck PARTS
for sale
Deck worked looked and worked great, until, while doing a preliminary check on it, we allowed the transport circuit board to short against the chassis, while unit was powered up. Then it would kick into fast wind mode anytime the tension arms were up. We replaced a few transistors on the board to no avail. Thus it's the "chopping block" for this fellow. Some parts may also fit the Teac X-1000R, X-7R, X-700R and possibly others.
PARTING OUT

Main, Upper Face Plate. New condition. No dings, scuffs or gouges (with right tape tension roller / counter sensor assembly intact) (does not include any mounting "hex" bolts) - $125.
Lower, Face Plate. New condition. No dings, scuffs or gouges (does not include any mounting "hex" bolts) - $65.
Face plate / cover mounting hex bolts / screws - $12. ea.
Plastic back cover / housing (excellent condition. No breaks, cracks or chips and not including mounting screws) - $65.
Teac X-1000 1000R
Capstan / Main Motor EM1446 / 5018003 (Will also fit X-700R) - $95. SOLD, SEE ALSO X-7 X-7R
Motor speed control PC board - $45.

Hub / reel / Fast Wind Fast Forward / Rewind motor motors right Part # EM1448 (see also Teac-X-7R) - $95. ea

Hub / reel / Fast Wind Fast Forward / Rewind motor motors left Part # EM1448 (Will also fit X-700R) (see also Teac-X-7R) - $95. ea

Hub spindles / reel locks (Reel Base with spring loaded spindle tips / reel locks) - $65 ea. SOLD OUT (The hub / reel spindles from the Teac X-1000 also fit the Teac X-2000. They are the same part both for fit and cosmetics)
Hub Brake drum / back hubs (reel base / spindle tips sold separately) - $30. ea

Rubber Pinch roller left or right (good used, less screw and hubcap) - $65. ea.

Pinch Roller Cover w/ screw (roller sold separately) $25. ea.

Any internal Solenoid RL-1661 / 51630440, RL-1657 / 5163041001, RL-1658 / 51630420 - $40. ea.
Counter / Tension arm sensors (PCB 112 / 113 - $35. ea.
Teac X-1000 1000R
Mic / Line / Output pots / controls - $30. ea.
Mic / Line / Output control knobs - $25. ea. back or front
Head Cover Plate / Panel (good with minor scuff on corner and not including hex bolts) - $40. SOLD
Head Cover back Plate / Panel- $25.
Head Cover hex bolts - $18. ea.
Heads (perfect) Play-53783007 SOLD, Record-537830006 SOLD, Erase head -537830008 - $55. ea SOLD

Analog VU level / Signal meters - $35. ea. 1 left in stock

Meter plastic-Plexi window / bezel / Trim - $30. SOLD

Transformer Power 5320014200 - $95.

Teac X-1000 1000R CIRCUIT BOARDS
Misc Internal circuit boards - $45. ea (unless individually priced elsewhere in this menu (less pots, jacks, switches, large transformers, outputs)

Power Servo Circuit Board PCB-153 w/ IC'S TD62504P, HD14584BP, HD14011BP, HD14066BP, LM-2904N, - $65. SOLD

DBX Encoder / Decoder Circuit Board PCB-108 w/ DBX chips 146732, 146742, and other IC's 45580 - $65.

Control Circuit Board PCB-144 W/ IC'S LC7800, 5220804301, TD62302P, and transistors B507, NTE152, ECG152, (less Remote port jack) - $65.

Record / Play Amplifier Circuit Board PCB-122 W/ IC'S TA75558P, TA75557P, OSCUNIT 100KHZ 50400900 - $65. (Less push switches)

Bridge Rectifier BA60 / C2D - $30.
SWITCHES, PUSH; Power Switch (cap sold separately) - $40.
SWITCHES, PUSH; DBX on PCB-199 - $35.

SWITCHES, PUSH; Reel size, Speed or Record Mode - $30. ea. SOLD OUT OF THESE

SWITCHES, PUSH; Timer switch - $30. ea.
Teac X-1000 1000R
Timer switch extension rod - $25.
Push Switch Caps - $18. ea.
Pitch Control pot with wiring harness - $35.
Auto spacer, 100k Ohms linear control pot - $30.
Pitch Control Knob - $30. ea.
Tape lifter lever / switch / knob assembly - $30.

Transport Selector / Digital counter / readout / display assembly w/ buttons & switches (Program, Repeat, Cue, STC, STZ, Clear, Rew, Rev, Stop, Forward, FF, Pause, Dupli Sync, Rec Mute & Record switch assembly) with ribbon cables / connectors - $95. complete

Teac X-1000 1000R
Tape Tension Arm idler wheels / Rollers (rollers are different than X-7. Caps are the same) - $35. ea SOLD OUT
Tape Tension Arm idler wheels / Rollers (rollers are different than X-1000. Caps are the same) - $35. ea
Tape Tension Arm Cap / Hub Cap (See also X-7, X-7R, X-700, X-700R, X-1000, X-1000R) - $40. ea Cap only
Tape Tension Arms (less idler wheels, rollers and caps) - $35. ea

Tape Tension idler wheels / rollers (large) - $40. ea (left roller Sold, Right Roller with rubber still available. Left tension roller also Sold, but end Cap still available)
Hub Tension brakes / brake bands - $30. ea.
Capstan Flywheel - $35. ea
Headphone jack - $35.
RCA Input / Output Panel / section - $40.
Rear metal panel - $25.
Feet / Skids (7 7/8" overall length. Hole centers ~ 4") - $25 ea. SOLD OUT
Any Single Spring (valued at time to extract.) Usually $20-$35 ea.
NAB Hubs (see other sections of this page)
Other parts not listed quoted individually based mostly on part value and time required to extract. Phone or email for availability.

Parting out. Email or call for parts pricing / availability.

For NAB Hub adaptors, click HERE!

Other parts not listed quoted individually based mostly on part value and time required to extract. Phone or email for availability.

CLICK HERE FOR OTHER TEAC / TASCAM MODELS THAT MAY HAVE INTERCHANGEABLE PARTS

POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION
AND PRICING SUBJECT TO CHANGE AT ANYTIME AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately.
Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned,
you should do independent research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change
part numbers, specs, circuit designs, specs etc within the same model.

20% restock fee applies to all returns for refund.
See our "Warranties / Returns" page via the link below for more details.

$5 Surcharge on all orders under $20.

| GENERAL INFORMATION | *HOME PAGE* | CONTACT | FAQ'S I SELLING-TRADING | CONDITION RATINGS | ORDERING / POLICIES | WARRANTIES / RETURNS | SHIPPING | HOLD / SOLD | RESTORATION PROCEDURES I LINKS | CLIENT LIST |

ORDERING BY
E-MAIL:

WAIT, before you email or phone
PLEASE READ THIS:

ALSO: When e-mailing be sure to include a RELEVANT TOPIC, ie: Brand / Model number
in the SUBJECT LINE. SUBJECT lines left empty, or with SUBJECTS like;
Hello, Hi or similar will automatically be deleted by Anti-Virus / Spam settings.
(Subject lines left empty show up as "No Subject" and are deleted automatically
by our anti-spam settings"

    Before calling, PLEASE read the text in orange below.
No Really...Stop, Alto, Halt, etc.
BEFORE CALLING THIS NUMBER OR EMAILING.

(719) 964-7205
parts@oaktreevintage.com

If you DID NOT see your Unit or Part
"SPECIFICALLY"
listed, or the part you are seeking was already marked
"SOLD or SOLD OUT"
then please DO NOT CALL or EMAIL for it.
If you do not see it listed,   we do not have it,    nor do we know when it will come in,    nor do we have a "waiting list" for it,     nor do we know who would have it.
Sorry, but phone traffic for parts we don't have listed is too consuming of time resources.

    If you DO see your part listed, and it appears to be available or you know for a fact that it is a VERIFIED-GOOD substitution from a unit or part that we do show, then by all means, give us a call to verify availability and to place the order.
We keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!

9:30 AM- ~7:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE

___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.

Before ordering by postal mail, please phone or email us about the item
and the details of sending your funds. Thank-you.

THE ABOVE INTERNALLY LINKED PAGES SHOULD ANSWER MANY OF THE
QUESTIONS YOU MIGHT HAVE. THANK-YOU.

Copyright � 1997-2009 Oak Tree Enterprises
All manufacturer and product names are copyrights of their respective owners.
All photos and text contained within this site are protected and may not be
reproduced or used elsewhere, in anyway, without including the original credit tags / text. They also must be used / reproduced in their original form and include a complimenting credit to Oak Tree Vintage for their creation. This of course includes using OUR photos and OUR text in YOUR auctions / listings. All Rights Reserved. Site created with "Front Page" and is likely best viewed with Internet Explorer �. Will likely work on most other browsers as well.