| MOST
OF THE PARTS LISTED BELOW ARE FROM SALVAGE UNITS. |
|
|
|
|
(click on above thumbnails to
enlarge photos)
NEW
TEAC / TASCAM
10.5" x 1/4" NAB
REEL HUB ADAPTORS HUBS
For 1/4" tape decks. Designed to allow decks capable of fitting 10
and 10.5" reels to accommodate them on the standard small reel
spindles. Easy and quick to take on and off. Usually in stock. These
will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other
reel-reel tape decks that have standard small reel spindles, but can
take 10.5" reels. Used and
brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.
CURRENTLY SOLD OUT OF NEW |
(click on above thumbnails to
enlarge photos)
USED / VINTAGE
10.5" x 1/4" NAB
REEL HUB ADAPTORS HUBS
For 1/4" & 1/2" tape decks. Designed to allow decks capable of fitting 10
and 10.5" reels to accommodate them on the standard small reel
spindles. Easy and quick to take on and off. Usually in stock. These
will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other
reel-reel tape decks that have standard small reel spindles, but can
take 10.5" reels. Used and
brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.
1 PAIR OF USED TEAC CURRENTLY IN
STOCK
SEE PHOTO TO THE LEFT
|
(click on above thumbnails to
enlarge photos)
NEW
TEAC / TASCAM
10.5" x 1/2" NAB
REEL HUB ADAPTORS HUBS
For 1/2" tape decks. Designed to allow decks capable of fitting 10
and 10.5" reels to accommodate them on the standard small reel
spindles. Easy and quick to take on and off. Usually in stock. These
will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other
reel-reel tape decks that have standard small reel spindles, but can
take 10.5" reels. Used and
brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.
CURRENTLY SOLD OUT
|
(click on above thumbnails to enlarge
photos)
PIONEER PR-220 or 220A
1/4" NAB
REEL HUB ADAPTORS HUBS
Pioneer PR-220 NAB hub adaptors, for 1/4" tape
decks. Designed to allow decks capable of fitting 10 and 10.5" reels to
accommodate them on the standard small reel spindles. Easy and quick to
take on and off. May need optional shim behind it for
tightest fit.
$89.99. matched pairs
$54.99 singles / each
SOLD OUT CURRENTLY
|
|
|
(Click on above thumbnails to enlarge photos)
SONY, TEAC, SANSUI, PIONEER, RHODES ELECTRIC PIANO
REPLACEMENT
AC POWER CORD / CABLE FOR
STEREOS AND REEL TO REELS REEL DECKS
for sale
Replacement AC power cord for many older
Accuphase?, Sony, Sansui,
Teac, Pioneer and other vintage audio components / electronic units,
especially Sony TC, Teac Reel to Reels, tape decks, older Sansui and Pioneer
Receivers, Pioneer Reel To Reels, and probably many others. It will also fit
early version Rhodes Electric Pianos that have 2 flat spades / prongs.
Currently only a few used available.
$24.99
Currently out of stock on new cords, but may have used available at same $24.99.
Call for availability.
Here are just a few of the units this cable will fit. Teac models for sure;
2300S, 3340, 4010, 4010S, 6010, 6010S. Pioneer models for sure; RT-1020 & RT-1050. Many Sony R2R's. Some Sansui
Receivers & Reel to Reels.
(Will not fit Sansui QRX-6500 and any other "round" prong receptacle.
Occasionally we will have that version AC cord / cable.)
|
|
(click on above thumbnails to enlarge photos)
NEW! FRESH RUBBER!
TEAC
REEL HUB / SPINDLE ADAPTORS / STOPPERS
For Open-reel tape decks. Designed to hold reels on the spindles of
decks that did not have built-in Reel locks. These will fit Teac, Akai,
Roberts, Rheem, Sony *, Ampex and other
reel-reel tape decks that have standard small reel spindles. Easy and
quick to take on and off. These are New Stock and made of new rubber.
Great to replace your old, dried out / cracked or lost ones.
$24.99. matched pairs
CURRENTLY OUT OF STOCK 6/26/07
* Still best to use Sony
decks in horizontal mode unless you have the original Sony Rubber stoppers
as they are slightly different. These TEAC stoppers will work with Sony's
when used in horizontal position.
|
(Click on above thumbnails to enlarge photos)
TEAC
124
"SYNCASET"
CASSETTE DECK
- PARTING OUT -
We completely went through the deck replacing / reconditioning all rubber
and cleaning all switches and then found, after spending about 4 hours on
it, that it records very low and distorted on both channels. This was
Teac's first "Sound-on-Sound" capable cassette deck. Motors run
great and heads appear to be in good shape. Problem unknown at this point.
Cosmetic Cond. 8.5
Complete AS-IS
$49.
|
- |
- |
|
|
(Click on above thumbnails to enlarge photos)
TEAC
2300S
Reel-Reel Deck
PARTS
for sale
Parting out. Tape transport (play) relay only clicks and will not start
play. Call or email for part you need.
Parting out.
Face Plate - CLEAN - $45.
Capstan Main Motor (EM282)- $65
Hub / reel motor right (EM1472)- $55.
Hub / reel motor left (EM1472)
- $55.
Tape counter mechanism - $30.
Capstan Main Flywheel - $35
Back Panel - $25. (Cases, covers and side plate / panels, etc. do not include
mounting screws as those are sold separately)
Meters with lens - $30. ea.
Hub spindles with screws (Reel Base) - $35 ea.
Teac 2300 2300S
Rubber Pinch roller (good used) - $45.
Relays (MY4 0US-24DC
four In stock, LC1 two in stock)
- $25. ea.
Mic / Output / Line / Playback Pots
/Jacks
(concentric pairs. Output / Line are 100k x2. Mic is
10K x2)
- $30 ea. (SOLD OUT OF
OUTPUT AND LINE POTS. STILL HAVE MIC POT IN STOCK.)
Mic / Line / Output knobs - $25 / concentric
pair
Head Cover with Teac logo - $30.
Heads / Head assembly (perfect) - $95 for all on the mounting
plate.
Internal circuit boards - $45. ea (less pots, switches,
large transformers, outputs)
The following boards are sold;
50484080 & 50484090
Back tension Wire Wound Resistors with clamping
connectors - $20. ea.
internal Solenoid
(RL-1604, RL1603)- $30. ea.
Push switches $25. ea.
Micro Switches V-1A44, V-1A10, V-1A etc. - $20 ea.
Round switch caps (when removable) - $8. ea
Teac 2300 2300S
Power / Speed switches - $15 ea.
Tape Transport switch caps - $18. ea
Power Transformer - $55
Tape Tension Arm Assemblies - $35. ea
Take-Up side SOLD
Tape Tension brakes - $25. ea.
Tape Guards - $15 ea.
Filter Caps Two (3.9 + 0.9uF
,250WV.AC)
- $20 ea.
11 pin Dummy Plug for Remote jack - $20
Side Panel / Face / etc. Screws - call for price
Other parts not listed quoted individually based mostly on part value
and time required to extract. Phone or email for availability.
|
(Click on above thumbnails to enlarge photos)
TEAC
A-4010S A 4010 S A4010S
Reel-Reel Deck
PARTS
(MUCH OF THIS UNIT WAS SOLD AS
A MOVIE PROP. CALL OR EMAIL FOR PART YOU NEED.)
for sale
Parting out.
Call or email for availability.
Face Plate - CLEAN - $45.
SOLD
Capstan Main Motor 70115 - $65
Hub / reel motor right- $55. SOLD
Hub / reel motor left - $55. SOLD
Tape counter mechanism - $30. SOLD
Walnut Veneer Case - good - $55.
(Cases, covers and side plate / panels, etc. do not include
mounting screws as those are sold separately)
SOLD
Masonnite Back Panel - $25.
(Cases, covers and side plate / panels, etc. do not include
mounting screws as those are sold separately)
Meters with lens - $30. ea. SOLD
Hub spindles with screws (Reel Base) - $35 ea.
SOLD
TEAC
A-4010S A 4010 S A4010S
Rubber Pinch roller (good used) - $45.
Auto-Reverse Sensor - $30.
Mic / Line / Playback Pots - $30 ea.
SOLD
Mic / Line / Output knobs (concentric pairs) - $25 / concentric
pair
Head Cover with Teac A-4010S logo - $30.
SOLD
Heads / Record, Play / Playback / Erase Head (perfect) - $35
each.
Internal circuit boards (48097-1, 48081, 48064, 48079)
- $45. ea (less pots, switches, large transformers,
outputs)
Back tension Wire Wound Resistors with clamping
connectors - $25. ea.
Any internal Solenoid (KGS RL-614 / 61616-1)- $30. ea.
Relay / Relays OMRON TYPE MH4P / 1168)
Push switches $25. ea.
Tape Speed Switch array - $45.
Round switch caps (when removable) - $8. ea
TEAC
A-4010S A 4010 S A4010S
Tape Transport switch caps - $18. ea
SOLD
Power Transformer 56138-2 - $55
Power Transformer 56140 - $45
Tape Tension Arm Assemblies - $35. ea
SOLD
Tape Tension brakes - $35. pr.
Front cover - $60. SOLD
Panel Mount 7 or 11 pin connectors - $30. ea
8 pin Dummy Plug for Remote jack - $20.
11-pin jumper cable with connectors for Record
Amp / Tape Deck -
$35. ea.
7-pin jumper cable with connector for REC
Equalizer - $25. ea.
Fuse Cap insert - $25
Fuse holder (non-world / multi-voltage style)
Other parts not listed quoted individually based mostly on part value
and time required to extract. Phone or email for availability.
(Click on above thumbnails to enlarge photos)
SONY, TEAC, SANSUI, PIONEER, RHODES ELECTRIC PIANO
REPLACEMENT
AC POWER CORD / CABLE FOR
STEREOS AND REEL TO REELS REEL DECKS
for sale
Replacement AC power cord for many older
Accuphase?, Sony, Sansui,
Teac, Pioneer and other vintage audio components / electronic units,
especially Sony TC, Teac Reel to Reels, tape decks, older Sansui and Pioneer
Receivers, Pioneer Reel To Reels, and probably many others. It will also fit
early version Rhodes Electric Pianos that have 2 flat spades / prongs.
Currently only a few used available.
$24.99
Currently out of stock on new cords, but may have used available at same $24.99.
Call for availability.
Here are just a few of the units this cable will fit. Teac models for sure;
2300S, 3340, 4010, 4010S, 6010, 6010S. Pioneer models for sure; RT-1020 & RT-1050. Many Sony R2R's. Some Sansui
Receivers & Reel to Reels.
(Will not fit Sansui QRX-6500 and any other "round" prong receptacle.
Occasionally we will have that version AC cord / cable.)
|
(Click on above thumbnails to enlarge photos)
TEAC
A-6010 / AR-60
Reel-Reel Deck
PARTS
for sale
Parting out. Tape transport works great! AR-60 Pre-Amp also works, but has
a strong 60 cycle AC buzz when unit is powered up and in Tape Monitor
position.
Face Plate, Upper main - CLEAN - $65.
Teac A-6010 Lower Face panel with transport button
cutouts. Great cond. - $30.
Capstan / main Motor 70-114 090787 - $75
Hub / reel motor right- $65.
SOLD
Hub / reel motor left - $65.
TEAC A-6010 / AR-60
Tape counter mechanism - $35.
Walnut Veneer Case (Looks good, but has a few extra holes in
the side edges) - $35.
(Cases, covers and side plate / panels, etc. do
not include mounting screws as those are sold separately)
Masonnite Back Panel with metal fan vent - $25.
(Cases, covers and side plate / panels, etc. do
not include mounting screws as those are sold separately)
Multi-voltage selector / fuse holder (with insert cap) - $35.
Multi-voltage selector / fuse holder (insert cap only) - $25.
SOLD
Power or Record knob - $20 ea.
- Meters - $35. ea.
Hub spindles with screws (Reel Base with spindle) - $45 ea.
(1 left in stock)
/ A-4010S- Rubber Pinch roller (good used) - $45.
TEAC A-6010 / AR-60
Mic / Line / Output Pots - $30 ea.
Mic / Line / Output knobs (concentric pairs) - $25 / concentric
pair
Head Cover with Teac A-6010 logo - $35.
Heads / Head assembly (perfect) - $115 for all on the mounting
plate. - SOLD
Internal circuit boards - $45. ea (less pots, switches, large transformers,
outputs)
Back tension Wire Wound Resistors with clamping
connectors - $25. ea.
Any internal Solenoid - $35. ea.
Push switches $35. ea.
TEAC A-6010 / AR-60
switch caps (when removable) - $8. ea
Power Transformer - $65
Tape Tension Arm Assemblies - $35. ea
Tape Tension brakes - $35. pr.
Front cover - $60. SOLD
Panel Mount 8 or 11 pin connectors - $30. ea
11 pin Dummy Plugs for Remote / Repeat
jacks - $25. ea.
8 or 11 pin jumper cables with connectors -
$35.
HOLD ALL MULT-PIN CABLES / CONNECTORS CURRENTLY, SORRY.
ea.
AC Cord - SOLD
Other parts not listed quoted individually based mostly on part value
and time required to extract. Phone or email for availability.
|
(Click on above thumbnails to enlarge photos)
TEAC
X-7R / X7 / X7R
Reel-Reel Deck
PARTS
for sale
Some parts may also fit the Teac X-7 & X-7mkII Mark II,
X-1000R, X-1000, X-700, X-700R
Main Face Plate –
Has ID number, lightly etched above tape counter, but otherwise clean
- $75.
Back panel /
cover - $45.
Capstan /
Main Motor
EM1446
/ 5018003
(Will
also fit X-700R)- SOLD
Hub / reel / Fast
Wind Fast Forward / Rewind motor motors right Part
#
EM1448
(see also Teac-X-1000)
- $95. ea
Hub / reel / Fast
Wind Fast Forward / Rewind motor motors Left Part
#
EM1448
(see also Teac-X-1000. Will also fit X-700R)
- $95. ea
Hub spindles
(Reel Base with spindle tips) -
$65 ea.
Teac X-7 & X-7mkII Mark II
Rubber Pinch
roller (good used, less screw and hubcap) - $55.
ea.
Pinch Roller
Cover w/ screw $25. ea.
Any internal
Solenoid - $35. ea.
Tape Counter
- $35.
Mic / Line
Pots / controls - $30.
ea.
Mic / Line / Output
knobs (concentric / ganged) - $35 ea.
ganged pair
Head Cover
Plate / Panel - $45.
Heads
(perfect) Play-55692031, Record-55692020,
Erase-55692090
- $55. ea
Analog VU level meters - $35.
ea.
Misc Internal circuit boards - $45.
ea (unless individually priced elsewhere in this menu
(less pots, switches, large transformers, outputs)
Teac X-7 & X-7mkII Mark II
Control Circuit PCB-116 - $65.
Record / Play Circuit PCB-109 - $65.
OSCUNIT 100KHZ 50400900 - $45.
Push switches
(Rec. Mode, Bias, EQ or Speed) $30.
ea.
Auto Reverse Selector switch
- $30.
Timer switches - $25. ea.
Pitch Control pot - $30.
Pitch Control or Auto-Reverse Selector Knob - $20.
ea.
Transport
Selector assembly w/ buttons & switchs
(Rew, Rev, Stop, Forward, FF, Pause, Rec Mute & Record switch assembly)
- $65.
Power Transformer - $95.
Tape Tension
Arm Assemblies (less idler wheels) - $35. ea
Teac X-7 & X-7mkII Mark II
Tape Tension
Arm idler wheels / Rollers (rollers are different than
X-1000. Caps are the same) - $35. ea
HOLD CAPS
Hub Tension
brakes / brake bands - $30.
ea.
Capstan
Flywheel - $35. ea
RCA Input / Output Panel / section - $25.
Multi-pin Input / Output Panel / section
on PCB-109 - $35.
Rear metal panel - $25.
Any Single
Spring (valued at time to extract.) Usually $20-$35 ea.
Brand / Model - NAB Hubs (see other sections of this page)
Other parts not listed quoted individually based mostly on part value and
time required to extract. Phone or email for availability. |
(Click on above thumbnails to enlarge photos)
TEAC
X-1000 X1000 X1000R
Reel-Reel Deck
PARTS
for sale
Deck worked looked and worked great, until, while doing
a preliminary check on it, we allowed the transport circuit board to short
against the chassis, while unit was powered up. Then it would kick into fast
wind mode anytime the tension arms were up. We replaced a few transistors on
the board to no avail. Thus it's the "chopping block" for this fellow. Some
parts may also fit the Teac X-1000R, X-7R, X-700R and possibly others.
PARTING OUT
Main, Upper Face Plate.
New condition. No dings, scuffs or gouges (with
right tape tension roller / counter sensor assembly intact) (does not
include any mounting "hex" bolts) - $125.
Lower,
Face Plate.
New
condition. No dings, scuffs or gouges
(does not
include any mounting "hex" bolts)
- $65.
Face plate / cover mounting hex bolts /
screws - $12. ea.
Plastic back cover / housing (excellent condition. No
breaks, cracks or chips and not including mounting screws) - $65.
Teac X-1000
1000R
Capstan /
Main Motor
EM1446 / 5018003
(Will also fit X-700R)
- $95. SOLD, SEE ALSO X-7 X-7R
Motor speed control PC board - $45.
Hub / reel / Fast
Wind Fast Forward / Rewind motor motors right
Part #
EM1448
(see also Teac-X-7R)
- $95.
ea
Hub / reel / Fast
Wind Fast Forward / Rewind motor motors left
Part #
EM1448
(Will also fit X-700R)
(see also Teac-X-7R)
- $95.
ea
Hub spindles
(Reel Base with spring loaded spindle tips
/ reel locks) - $65 ea.
SOLD OUT (The hub /
reel spindles from the Teac X-1000 also fit the Teac X-2000. They are the
same part both for fit and cosmetics)
Hub Brake drum / back hubs (reel base / spindle tips sold separately) - $30.
ea
Rubber Pinch
roller left or right (good used, less screw and hubcap) - $55.
ea.
Pinch Roller
Cover w/ screw (roller sold
separately) $25. ea.
Any internal
Solenoid RL-1661 / 51630440, RL-1657 / 5163041001,
RL-1658 / 51630420
- $40. ea.
Counter / Tension arm sensors (PCB 112 / 113
- $35. ea.
Teac X-1000 1000R
Mic / Line
/ Output pots / controls - $30.
ea.
Mic / Line
/ Output control knobs - $25.
ea. back or front
Head Cover
Plate / Panel (good with minor scuff on corner and not
including hex bolts) - $40.
SOLD
Head Cover
back Plate / Panel- $25.
Head Cover
hex bolts - $18. ea.
Heads
(perfect) Play-53783007
SOLD, Record-537830006
SOLD,
Erase head -537830008
- $55. ea SOLD
Analog VU level / Signal meters - $35.
ea.
Meter bezel / Trim - $30.
Teac X-1000 1000R
Misc Internal circuit boards
(PCB-105, Power Servo
PCB-153, DBX Encoder / Decoder PCB-108, Record /
Play amplifier PCB-122 / PCB122 (with OSCUNIT 100KHZ 50400900,
less switches), Control PCB-144 (less Remote port jack),
- $45.
ea (unless individually priced elsewhere in this menu
(less pots, jacks, switches, large transformers, outputs)
Bridge Rectifier BA60 / C2D - $30.
Power Switch (cap sold separately) - $40.
DBX switch on PCB-199 - $35.
Reel size, Speed or Record Mode Switch - $30. ea.
(Speed Switch - Sold)
- Timer switch - $30. ea.
Teac X-1000 1000R
Timer switch extension rod - $25.
Push Switch Caps - $18. ea.
Pitch Control pot with wiring
harness - $35.
Auto spacer, 100k Ohms linear control pot - $30.
Pitch Control Knob - $30.
ea.
Tape lifter lever / switch / knob assembly - $30.
- Transport
Selector / Digital counter / readout
/ display assembly w/ buttons &
switches
(Program, Repeat, Cue, STC, STZ, Clear, Rew, Rev, Stop, Forward, FF, Pause,
Dupli Sync, Rec Mute & Record switch assembly)
with ribbon cables / connectors - $95.
complete
Teac X-1000 1000R
Power Transformer
5320014200 - $95.
Tape Tension
Arm idler wheels / Rollers (rollers are different
than X-7. Caps are the same) - $35. ea
(SOLD OUT)
Tape Tension idler wheels / rollers (large) - $40. ea
(left roller Sold, Right Roller with rubber still
available. Left tension roller also Sold, but end Cap still available)
Hub Tension
brakes / brake bands - $30.
ea.
Capstan
Flywheel - $35. ea
Headphone jack - $35.
RCA Input / Output Panel / section - $40.
Rear metal panel - $25.
Feet / Skids (7 7/8" overall length. Hole centers ~ 4") - $25 ea.
SOLD OUT
Any Single
Spring (valued at time to extract.) Usually $20-$35 ea.
Brand / Model - NAB Hubs (see other sections of this page)
Other parts not listed quoted individually based mostly on part value and
time required to extract. Phone or email for availability.
Parting out. Email or call for parts pricing / availability.
|
|
- |
TEAC reel to reel deck - 11-pin jumper cable with connectors
for Record Amp / Tape Deck -
$35. ea.
TEAC reel to reel deck - 11 pin Dummy Plugs for Remote /
Repeat jacks - $25. ea.
Only a few available.
HOLD ALL CURRENTLY, SORRY.
|
- |
UNDER CONSTRUCTION
|
NEW LISTING
11/7/06
(Click on above thumbnails to enlarge photos)
TEAC
R-1000 / R1000
Reel-Reel Deck
PARTS
PARTING OUT
Deck runs, but was not practical to restore.
Teac
R-1000 / R1000 parts
Main, Upper Face Plate.
New condition. No dings, scuffs or gouges (with
right tape tension roller / counter sensor assembly intact) (does not
include any mounting "hex" bolts) - $125.
Lower,
Face Plate.
New
condition. No dings, scuffs or gouges
(does not
include any mounting "hex" bolts)
- $65.
Case Lid Excellent condition - $35.
Teac
R-1000 / R1000 parts
Capstan /
Main Motor
70-111
- $45.
Capstan Flywheel w/ bearing / bushing - $35.
Hub / reel / Fast
Wind Fast Forward / Rewind motor motors right
Part #
70-209
- $45.
ea
Hub spindles
/ Brake drums (Reel Base with spindle tips) - $35 ea.
Pinch Roller - SOLD
Back tension resistors - $20 ea.
Any internal
Solenoid 61614
- $20. ea.
Counter
- $25. ea.
Teac
R-1000 / R1000 parts
Heads
(great condition with minor wear)
- $55.
ea. or $85 for all mounted on head chassis.
Head Cover - $30.
Misc Internal circuit boards
- $45.
ea (unless individually priced elsewhere in this menu
(less pots, jacks, switches, large transformers, outputs)
- Transport
Selector buttons &
switches - $35.
complete
Record Selector switch assembly - $35.
Power switch - $20.
Record / Playback VU meters - $35 for pair
Output / Line Input / Mic input pots - $30 ea
Concentric knob sets - $25 pair.
Mic Jacks - $15. ea
Teac
R-1000 / R1000 parts
Power Transformer
56118 - $40.
Hub Tension
brakes / brake bands - $20.
ea.
Headphone jack - $15.
RCA Input / Output Panel / section - $20.
Fuse cap $20.
Any Single
Spring (valued at time to extract.) Usually $20-$35 ea.
Other parts not listed quoted individually based mostly on part value and
time required to extract. Phone or email for availability.
Parting out. Email or call for parts pricing / availability.
(Click on above thumbnails to enlarge photos)
SONY, TEAC, SANSUI, PIONEER, RHODES ELECTRIC PIANO
REPLACEMENT
AC POWER CORD / CABLE FOR
STEREOS AND REEL TO REELS REEL DECKS
for sale
Replacement AC power cord for many older
Accuphase?, Sony, Sansui,
Teac, Pioneer and other vintage audio components / electronic units,
especially Sony TC, Teac Reel to Reels, tape decks, older Sansui and Pioneer
Receivers, Pioneer Reel To Reels, and probably many others. It will also fit
early version Rhodes Electric Pianos that have 2 flat spades / prongs.
Currently only a few used available.
$24.99
Currently out of stock on new cords, but may have used available at same $24.99.
Call for availability.
Here are just a few of the units this cable will fit. Teac models for sure;
2300S, 3340, 4010, 4010S, 6010, 6010S. Pioneer models for sure; RT-1020 & RT-1050. Many Sony R2R's. Some Sansui
Receivers & Reel to Reels.
(Will not fit Sansui QRX-6500 and any other "round" prong receptacle.
Occasionally we will have that version AC cord / cable.)
|
NEW LISTING
11/7/06
(Click on above thumbnails to enlarge photos)
TEAC
A-1500-W
A1500 A1500W
AUTO-REVERSE
Reel-Reel Deck
PARTS
for sale
Parting out. Runs well, but heads are worn. Call or email for part needed.
Main, Upper Face Plate.
New condition. No dings, scuffs or gouges (with
right tape tension roller / counter sensor assembly intact) (does not
include any mounting "hex" bolts) - $125.
Lower,
Face Plate.
New
condition. No dings, scuffs or gouges
(does not
include any mounting "hex" bolts)
- $65.
Main Motor
70-116
/ EM-281
- $45.
Capstan Flywheel w/ bearing / bushing - $35.
Hub spindles
/ Brake drums (Reel Base with spindle tips) - $35 ea.
Back tension resistors - $20 ea.
Any internal
Solenoid 61621 / RL-613,
- $20. ea.
2 available
Counter
- $25. ea.
TEAC A-1500-W A1500 A1500W
Heads
(worn)
- $25
all.
Misc Internal circuit boards
- $45.
ea (unless individually priced elsewhere in this menu
(less pots, jacks, switches, large transformers, outputs)
- Transport
Selector buttons &
switches - $35.
complete
Record Selector switch assembly - $35.
Power switch - $20.
Record / Playback VU meters - $35 for pair
Output / Line Input / Mic input pots - $30 ea
Concentric knob sets - $25 pair.
Mic Jacks - $15. ea
TEAC A-1500-W A1500 A1500W
Power Transformer
56139 - $40.
Voltage selector - $25.
Hub Tension
brakes / brake bands - $20.
ea.
Headphone jack - $15.
RCA Input / Output Panel / section - $20.
Fuse cap $20. SOLD (see R1000)
Any Single
Spring (valued at time to extract.) Usually $20-$35 ea.
Other parts not listed quoted individually based mostly on part value and
time required to extract. Phone or email for availability.
Parting out. Email or call for parts pricing / availability.
(Click on above thumbnails to enlarge photos)
SONY, TEAC, SANSUI, PIONEER, RHODES ELECTRIC PIANO
REPLACEMENT
AC POWER CORD / CABLE FOR
STEREOS AND REEL TO REELS REEL DECKS
for sale
Replacement AC power cord for many older
Accuphase?, Sony, Sansui,
Teac, Pioneer and other vintage audio components / electronic units,
especially Sony TC, Teac Reel to Reels, tape decks, older Sansui and Pioneer
Receivers, Pioneer Reel To Reels, and probably many others. It will also fit
early version Rhodes Electric Pianos that have 2 flat spades / prongs.
Currently only a few used available.
$24.99
Currently out of stock on new cords, but may have used available at same $24.99.
Call for availability.
Here are just a few of the units this cable will fit. Teac models for sure;
2300S, 3340, 4010, 4010S, 6010, 6010S. Pioneer models for sure; RT-1020 & RT-1050. Many Sony R2R's. Some Sansui
Receivers & Reel to Reels.
(Will not fit Sansui QRX-6500 and any other "round" prong receptacle.
Occasionally we will have that version AC cord / cable.)
|
(Click on above thumbnails to enlarge photos)
TEAC
EQA-20 EQA20
USED / PARTS UNIT
SOLD
Great looking Stereo / Dual 10 band graphic controls featuring
de-tented linear pots with +- 12 dB throw. Dual built-in tape monitors with
record function. Bright & colorful LED spectrum analyzer screen. EQ looks
great and does work, however it has a static noise when most of the faders
are moved (cleaning doesn't seem to help) and one side of one of the tape
monitor inputs is about 5 db lower in level. Works fine once the faders are
left alone in position and if you don't need the second tape monitor. Use
as-is, for parts or for repair. Measures 16.5" wide x 9" deep x 3" high and
weighs 9 lbs unpacked.
Cosmetic cond. 9.5
AS-IS
$35.
SOLD
|
|
- |
- |
Please see / read the
"red" paragraphs above prior to hitting this email link or
calling)
