High Bias (Chrome)
7" Reel to Reel 1/4" Tape
10-Pack
Used 7", HIGH Bias / CHROME Reel to Reel tape. "Grab-bag" assortment of brands may include Ampex, BASF, Irish, Maxell, Realistic, Scotch / 3M, Sony, Soundcraft, TDK and others. Most at least 1800 feet and some with leaders intact. Most include individual box. Most have been used and will have recordings on them. You will need to come up with your own labels as even if they are in the box, they likely aren't "sticky" anymore. Due to unpredictability of stocks we cannot "cherry pick" brands so they are always assorted. Plastic reels may be clear or black.
Used and likely recorded 10-pack $89.50 shipped*
VERY LIMITED SUPPLY BACK IN STOCK
or
We can also do a "Bulk erase" on your tapes for an additional $1.00 ea.
Used and Erased 10-Pack  $99.50 shipped*

* Packed and shipped via Ground shipment to any of the lower 48 states. Other destinations can be calculated.

Normal Bias
7" Reel to Reel 1/4" Tape
10-Pack
Used 7", Normal Bias Reel to Reel tape. "Grab-bag" assortment of brands may include Ampex, BASF, Irish, Maxell, Realistic, Scotch / 3M, Sony, Soundcraft, TDK and others. Most at least 1800 feet and some with leaders intact. Most include individual box. Most have been used and will have recordings on them. You will need to come up with your own labels as even if they are in the box, they likely aren't "sticky" anymore. Due to unpredictability of stocks we cannot "cherry pick" brands so they are always assorted. Plastic reels may be clear or black.
Used and likely recorded 10-pack $69.50 shipped*
or
We can also do a "Bulk erase" on your tapes for an additional $1.00 ea.
Used and Erased 10-Pack  $79.50 shipped*
VERY LIMITED SUPPLY BACK IN STOCK

* Packed and shipped via Ground shipment to any of the lower 48 states. Other destinations can be calculated.

  


(click on above thumbnails to enlarge photos)
MAXELL
UD-180-35
10.5" Aluminum metal reels 
High Bias 
 Reel to Reel 1/4" Tape
SOLD OUT
for sale
Pre-owned, HIGH Bias Reel to Reel tape. 1,100 meters (3600 ft.) in length. Most with leaders intact. All include individual box. Most have been used and will have recordings on them (we can bulk erase them for additional charge below). You will need to come up with your own labels as even if they are in the box, they likely aren't "sticky" anymore.
 Used and likely recorded
 $64.99 ea. shipped*

CURRENTLY SOLD OUT

or
We can also do a "Bulk erase" on your tapes for an additional $5.00 ea.
Used and Erased Maxell UD 180-35  
$69.50 ea. shipped 

CURRENTLY SOLD OUT

(while supply lasts)*

* Packed and shipped via Ground shipment to any of the lower 48 states. Other destinations can be calculated.

  

CURRENTLY SOLD OUT

including shipping 
(while supply lasts)*
or
We can also do a "Bulk erase" on your tapes for an additional $5.00 ea.

* Packed and shipped via Ground shipment to any of the lower 48 states. Other destinations can be calculated.

(click on above thumbnails to enlarge photos)

NEW! FRESH RUBBER!
TEAC
REEL HUB / SPINDLE ADAPTORS / STOPPERS
For Open-reel tape decks. Designed to hold reels on the spindles of decks that did not have built-in Reel locks. These will fit Teac, Akai, Roberts, Rheem, Sony *, Ampex and other reel-reel tape decks that have standard small reel spindles. Easy and quick to take on and off. These are New Stock and made of new rubber. Great to replace your old, dried out / cracked or lost ones.
$24.99. matched pairs
CURRENTLY OUT OF STOCK 6/26/07

* Still best to use Sony decks in horizontal mode unless you have the original Sony Rubber stoppers as they are slightly different. These TEAC stoppers will work with Sony's when used in horizontal position.

  

(Click on above thumbnails to enlarge photos)
SONY, TEAC, SANSUI, PIONEER, RHODES ELECTRIC PIANO
REPLACEMENT
AC POWER CORD / CABLE FOR
STEREOS AND REEL TO REELS REEL DECKS
for sale
Replacement AC power cord for many older Accuphase?, Sony, Sansui, Teac, Pioneer and other vintage audio components / electronic units, especially Sony TC, Teac Reel to Reels, tape decks, older Sansui and Pioneer Receivers, Pioneer Reel To Reels, and probably many others. It will also fit early version Rhodes Electric Pianos that have 2 flat spades / prongs.
Currently only a few used available.
$24.99
Currently out of stock on new cords, but may have used available at same $24.99.
Call for availability.

Here are just a few of the units this cable will fit. Teac models for sure; 2300S, 3340, 4010, 4010S, 6010, 6010S. Pioneer models for sure; RT-1020 & RT-1050. Many Sony R2R's. Some Sansui Receivers & Reel to Reels.
(Will not fit Sansui QRX-6500 and any other "round" prong receptacle. Occasionally we will have that version AC cord / cable.)



 

______________________________________________




(Click on above thumbnails to enlarge photos)

SONY
REPLACEMENT
AC CORD / CABLE
4-PIN FOR TV'S, STEREOS AND REEL TO REELS REEL DECKS
for sale
New, replacement AC cord for many older Sony electronic units including their Portable TV's. 6' in length.
NEW
$24.99

 

 

(click on above thumbnails to enlarge photos)
NEW
-THE ULTIMATE-
AUDIO-TECHNICA
AT-440MLa0T
"PURPLE"
1/2" STANDARD MOUNT
TURNTABLE CARTRIDGE
for sale
The Top of the Line in their current Moving Magnet line of high quality turntable cartridges. If you are looking for the best from Audio-Technica here you go. Features "MicroLine" cut Nude Diamond (allows for least record wear and most groove contact) with specially cut Square Shank mounted to a Tapered Alloy tube cantilever. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. 
Specs are as follows:

- "MicroLine" cut, Nude, Square Shank Diamond  0.12 mil
stylus
- Tapered alloy tube Cantilever
- Frequency Response: 20-20kHz
- Output is a strong 4.0 (mV, 1 kHz, 5 cm/sec)
- Channel Separation; 27 (dB at 1 kHz)
- Channel Balance; 0.8 (dB at 1 KHz)
- Coil impedance : 3,200 ohms at 1 kHz
- Coil inductance (mH, 1 kHz) : 490
- Dynamic compliance (x10-6 cm/dyne) : 10
- Static compliance (x10-6 cm/dyne) : 40
- Dimensions (mm) : L17.3 x W 16.0 x H 28.0
Weight (g) : 6.5
- Recommended Vertical Tracking Force 1.0-1.8 grams (1.4 optimal)
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).


Again if you are looking for the best sounding cartridge for listening to and especially for recording your vinyl collection and your record collection is in good shape and you want to insure it stays that way this is probably the cartridge for you. Yes it's more expensive than most (although it's not uncommon for cartridges to cost up into the $1000-$2000 range and they can go as high as $15,000), but when compared to the time spent recording, listening to and caring for your albums overtime it's a good and reasonable investment. You won't be disappointed. 
AUDIO-TECHNICA
AT-440MLa0T
NEW
MSRP $300.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $189.99
includes "Real-Time, Real-Person" phone support for rebalancing and re-adjusting your tone-arm's user adjustments if required or desired!

 

     

NEW ITEM
(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
ATP-2XN0T
PROFESSIONAL / DJ / COMMERCIAL USE
1/2" STANDARD MOUNT
TURNTABLE CARTRIDGE
ALSO FOR PLAYING 78 RPM RECORDS!
COMES WITH AN EXTRA STYLUS TOO!
for sale
Audio Technica's commercial / pro series, Moving Magnet line of high quality turntable cartridges. Designed for any speed records, 16, 45, 33 1/3 or 78 RPM records. This is our only one designed for 78 RPM records. If you are looking for the most durability, or your records aren't in the best shape and you're having a problem tracking heavy enough for some of them, or your table tracks heavy by design, then here you go. Features elliptical cut bonded Diamond (allows for least record wear and most groove contact) with  0.4 x 0.7 cut round Shank mounted to a Super Heavy, Alloy tube cantilever. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. 
Specs are as follows:

Frequency Response - 15-22,000 Hz
Channel Separation - 23/17 (dB at 1 kHz/10 kHz)
Vertical Tracking Force - 3.0-5.0 grams
Stylus Construction - Bonded round shank
Recommended Load Impedance - 47,000 ohms
Output, a strong 5.3 mV (at 1 kHz, 5 cm/sec)
Channel Balance - 1.5 dB
Stylus Shape - 0.4 x 0.7 mil elliptical
Cantilever - Alloy tube
Mount - Half-inch
Replacement Stylus - ATP-N2 (an extra new one included!)


If you are looking for a cartridge to for DJ or Heavy duty commercial / Professional applications, or your records are a bit "beat" and you need heavy tracking, or you wish to listen to 78's on your "good" table, then this is the cartridge you need. It's made to be abused! Yes it's more expensive than most (although it's not uncommon for cartridges to cost up into the $1000-$2000 range), but when compared to the time spent recording, listening to and caring for your albums overtime it's a good and reasonable investment. You won't be disappointed. 
AUDIO-TECHNICA
ATP-2XN0T
NEW
MSRP $150.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $119.99
(with extra new stylus included)
includes "Real-Time, Real-Person" phone support for rebalancing and re-adjusting your tone-arm's user adjustments if required or desired!


 

     

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
AT-120E/T0T
"ORANGE"
1/2" STANDARD MOUNT
TURNTABLE CARTRIDGE
OUR MOST POPULAR MODEL!
for sale
Superior performance in their current Moving Magnet line of high quality turntable cartridges. If you are looking for outstanding performance from Audio-Technica, but still keeping the price under a hundred bucks, then here you go. Features Elliptical cut Nude, 0.3 x 0.7 mil., round shank Diamond mounted to a Alloy tube cantilever. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. 
Specs are as follows:

- Elliptical Nude Diamond
- Elliptically cut @ 0.3 x 0.7 mil
- Frequency Response: 15-25kHz
- Output is a strong 5 mV @ 1kHz
- Recommended Vertical Tracking Force 1-1.8 grams
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).


Again if you are looking for an incredible sounding cartridge for listening to and especially for recording your vinyl collection and your record collection is in good shape and you want to insure it stays that way, this is probably the cartridge for you. Yes it's a bit more expensive than many (although it's not uncommon for cartridges to cost up into the $1000-$2000 range), but when compared to the time spent recording, listening to and caring for your albums overtime it's a good and reasonable investment. You won't be disappointed. 
AUDIO-TECHNICA
AT-120E/T0T
NEW
MSRP $160.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $89.99
includes "Real-Time, Real-Person" phone support for rebalancing and re-adjusting your tone-arm's user adjustments if required or desired!

90 day full-price upgrade available on this model. *(See below for details)

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
AT311EP AT-311EP0T AT 311EP
UNIVERSAL
1/2" OR P-MOUNT
TURNTABLE CARTRIDGE
for sale
The Audio-Technica AT-311 EP. Will fit turntables requiring either a P-mount or 1/2" standard mount cartridge. A great performing cartridge offering above average performance with-out breaking the bank. Features an Elliptical 0.3 x 0.7 mil Bonded-Diamond stylus for exceptional groove tracking. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. The AT-311EPOT has a finer elliptical cut to the diamond stylus than it's slightly cheaper counterpart, the AT-301EP / AT301EP and since it has an elliptical cut, will "blow away" the AT300P / AT-300P with it's "Close-n-Play" / Toy style "Conical" cut! At least a good elliptical cut is imperative to accurate sound and lower record wear. Specs are as follows:

- Elliptical Nude Diamond Stylus
- Elliptically cut Bi-Radial @ 0.3 x 0.7 mil
- Frequency Response: 15-27kHz
- Output is a high 5 mV @ 1kHz=
- Thin-Wall Cantilever
- Recommended Vertical Tracking Force 1.0-1.5 grams
- Vertical Tracking Angle 20 °
- Channel Balance = 1.25
- Channel Separation; 29dB @ 1kHz & 18dB @ 10kHz
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).
- Load Capacitance 100-200 pF


If you are looking for a much above average sounding cartridge for listening and / or recording your vinyl, cartridge then this would make a very nice sounding unit for your 1/2" or P-mount turntable. 
AUDIO-TECHNICA
AT-311EP0T
NEW
MSRP $110.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $59.99
includes "Real-Time, Real-Person" phone support for rebalancing and re-adjusting your tone-arm's user adjustments if required or desired!

 

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
  AT-92ECD AT-92ECD0T  AT92ECD
UNIVERSAL
1/2" OR P-MOUNT
TURNTABLE CARTRIDGE
for sale
The Audio-Technica AT-92E. Will fit turntables requiring either a P-mount or standard mount cartridge. Another great performing cartridge offering above average performance with-out breaking the bank. Features a Bonded Elliptical 0.3 x 0.7 mil Diamond stylus for exceptional groove tracking. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. The AT-92EPOT has a finer elliptical cut to the diamond stylus than it's slightly cheaper counterparts, the AT-301EP / AT301EP and since it has an elliptical cut, will "blow away" the AT300P / AT-300P with it's "Close-n-Play" / Toy style "Conical" cut! At least a good elliptical cut is imperative to accurate sound and lower record wear.
Specs are as follows:

- Frequency Response: 15-27kHz
- Output 3.5 mV @ 1kHz
- Recommended Vertical Tracking Force 1.0-1.5 grams
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).


If you are looking for an above average sounding cartridge for listening and / or recording your vinyl then this would make a nice sounding cartridge for your 1/2" or P-mount system. 
AUDIO-TECHNICA
AT-92ECD0T
NEW
MSRP $79.

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $44.99

90 day full-price upgrade available on this model. *(See below for details)

 

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
AT-71ELC AT-71ELC0T AT71ELC
"GREEN"
1/2" STANDARD MOUNT
TURNTABLE CARTRIDGE
for sale
The Audio-Technica AT-71ELCOT. Will fit turntables requiring a standard mount cartridge. Another great performing cartridge offering better performance, but keeps the wallet happy. Features a Bonded Elliptical 0.4 x 0.7 mil Diamond stylus for better than average groove tracking. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. Since the AT-71ELCOT has an elliptically cut diamond stylus it will "blow away" it's slightly cheaper counterparts, the AT70L / AT-70L and CN5625AL (AT-70L is now discontinued anyway) with their "Close-n-Play" / Toy style "Conical" cut stylus'! At least a good elliptical cut is imperative to accurate sound and lower record wear.
Specs are as follows:

- Elliptical Diamond Stylus
- Elliptically cut Bi-Radial @ 0.4 x 0.7 mil
- Frequency Response: 20-22kHz
- Output 3.5 mV ( 1 kHz, 5 cm/sec)
- Channel Separation; 22 (dB at 1 kHz) / 17 (dB at 10 kHz)
- Channel Balance; 1.5 (dB at 1 KHz)
- Recommended Vertical Tracking Force 1.0-2.0 grams
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).


If you are looking for a decent sounding cartridge for listening to your albums, but not so much  recording and your budget will not bear the cost of the AT-440MLa or the AT-120E/T then this would make a nice sounding cartridge for your 1/2" mount turntable. 
AUDIO-TECHNICA
AT-71ELC0T
NEW
MSRP $80.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $49.99
includes "Real-Time, Real-Person" phone support for rebalancing and re-adjusting your tone-arm's user adjustments if required or desired!

90 day full-price upgrade available on this model. *(See below for details)

  

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
AT-3482P0T
P- MOUNT
TURNTABLE CARTRIDGE
for sale
An entry level Audio-Technica AT-3482P. Will fit turntables requiring a "P-mount" cartridge. Definitely keeps a lid on the budget. Features a Bonded Conical 0.7 mil Diamond stylus for tracking and extended record life. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation.
 Specs are as follows:

- Frequency Response: 20-20kHz
- Output strong 5 mV @ 1kHz
- Recommended Vertical Tracking Force 1.0-2.0 grams
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).


If you are looking for a cartridge for minimal listening to your albums, not recording and your budget will not bear the cost of the above mentioned cartridges then this would make an OK sounding cartridge for your "P" mount turntable. (If you're looking to do much recording "bite the bullet and spend a bit more money for one of the above mentioned cartridges. The quality will be appreciably better and given the amount of time you will invest in your recordings the extra dollars spent at this time will be trivial over time.)
AUDIO-TECHNICA
AT-3482P0T
NEW
MSRP $50.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $34.99

 

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
CN5625AL0T
"YELLOW"
1/2" STANDARD MOUNT
TURNTABLE CARTRIDGE
for sale
An entry level Audio-Technica CN5625AL. Will fit turntables requiring a 1/2" standard mount cartridge. Definitely keeps a lid on the budget. Features a Bonded Conical 0.7 mil Diamond stylus for tracking and extended record life. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. 
Specs are as follows:

- Frequency Response: 20-20kHz
- Output strong 4.2 mV @ 1kHz
- Recommended Vertical Tracking Force 1.0-3.0 grams
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).


If you are looking for a cartridge for minimal listening to your albums, your speakers or headphones are of questionable quality, your album quality is less than great, you're not recording and your budget will simply not bear the cost of the above mentioned cartridges then this would make an OK sounding cartridge for your standard 1/2" mount turntable. (If you have decent speakers / headphones / vinyl, or you're looking to do much recording "bite the bullet and spend a bit more money for one of the other cartridges on this page, with an "elliptical" diamond stylus as opposed to this "conical" model. The quality will be appreciably better and given the amount of time you will invest in your recordings and listening, the extra dollars spent now will be trivial over time.)
AUDIO-TECHNICA
CN5625AL0T
NEW
MSRP $40.

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".

Our price $29.99

90 day full-price upgrade available on this model. *(See below for details)